Skc 223-Series PowerFlex - Single User Manual

Browse online or download User Manual for Power suppliers Skc 223-Series PowerFlex - Single. SKC 223-Series PowerFlex - Single User Manual [en] [fr]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
PowerFlex
Battery Charging System
Small and lightweight, the SKC PowerFlex
®
is an advanced charging system
designed for optimal charging of NiCad and NiMH ba ery packs for most SKC
personal air sampling pumps.
Pump-speci c cables are used to connect ba ery packs to the PowerFlex so that
only one charger is needed for most SKC personal sample pumps (excluding Ex
and ATEX models and models with lithium-ion [Li-Ion] ba eries). PowerFlex
fully charges ba ery packs in 6 to 8.5 hours, and then automatically switches
to a safe pulse trickle charge. An LED indicates ba ery charge status. Ba ery
packs can be charged a ached to or detached from the pump.
Performance Pro le*
Dimensions: 1.2 x 2.3 x 4.6 in (3.0 x 5.8 x 11.7 cm)
Weight: 4 oz (0.1 kg)
Charging time
: 6 to 8.5 hrs
Status LED: Steady Red = Charging
Steady Green = Trickle charge
Input voltage: 223-2000: 100-240 V
Intrinsic safety: Not intended for use in explosive or hazardous
locations
Approvals: Power supply is
for electrical safety and
is CE marked.
* For U.S.-produced pump models only. Not compatible with Ex or ATEX-approved models.
‡ Typical charging times vary with model, ba ery capacity, and level of discharge.
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA
Tel: 724-941-9701 Fax: 724-941-1369 e-mail: [email protected]
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Operating Instructions

PowerFlex Battery Charging SystemSmall and lightweight, the SKC PowerFlex® is an advanced charging system designed for optimal charging of NiCad and N

Page 2 - Operation

Operation Procedure for PowerFlex Activation1. Plug the power cable into the power jack on the back of the PowerFlex. Plug the wall cube into a power

Page 3 - Troubleshooting

35. The LED at the port will light a steady red to indicate that a charge sequence has been initiated.If the LED does not light to red in < 60 seco

Page 4 - Form 40069 Rev 1302

4Form 40069 Rev 1302www.skcinc.comPowerFlex Charging System Cat. No.PowerFlex Single Charger† includes power supply. Purchase pump-specifi c cables sep

Comments to this Manuals

No comments