Skc 222-Series Low Flow Pump User Manual

Low Flow Sample Pump222 SeriesOperating InstructionsSKC Inc.863 Valley View RoadEighty Four, PA 15330 USAForm 3707 Rev 1302

8Replacement Parts and AccessoriesPart Description Cat. No.Motor (Model 222-3) P222301Motor (Model 222-4) P222402 Battery Pack 222-3SR-0

9SKC Limited Warranty and Return PolicySKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and

Table of ContentsDescription ...1Performance Profi le ...

1DescriptionSKC 222 Series Low Flow Pumps are miniature diaphragm-type pumps for personal or area sampling of gases and vapors in air using sorbent tu

2Performance Profi leFlow Rate: 222-3: 50 to 200 ml/min 222-4: 20 to 80 ml/minOperation Time: 10 hrs per battery chargeCase: Sturdy, lightweight

3Battery Installation/ChargingInstalling the Battery PackTo enhance ba ery life, SKC ships the ba ery pack separate from the pump.Once installed, co

4OperationSetting the Sampling Rate1. Using a slo ed screwdriver, remove the metal plate on the front of the pump.2. Use the screwdriver to turn th

5Determining the Pump FactorTo determine the relation between the counter and the pump volume:1. Using fl exible tubing, connect the pump inlet to the

6MaintenanceChecking for LeaksTo function properly and provide correct pumping volume, the diaphragm must be free from leaks and close positively. Rem

7Changing the Battery1. Remove the six screws on the back of the pump case.2. Grasp the white connector and pull it apart. 3. Gently pull the ba